The multi-station barrel-holding bagging machine production line adopts a double-mixing and storage mode, which allows the bagging machine to operate continuously. The bagging length and tightness of the bagging machine are adjustable, which is suitable for the operation of long bags of shiitake mushrooms. The sleeve is replaceable, and it integrates multiple process operations such as mixing, lifting, material distribution, bagging, and automatic tying, which can meet the daily production of nearly 80,000 bags. 

There are many kinds of mushrooms, all of which have high nutritional value for us.

Edible Mushroom Mite Control Technology Optimization About 7 days after sowing edible mushrooms, effective mite control measures should be taken to ensure production quality. The following are detailed methods for mite control: Observation and Detection After covering the substrate with a colored film for 5-10 minutes, closely observe the culture material with a magnifying glass. Once small, flat or oval-shaped, white or yellow mites with multiple bristles are found, immediately take the following measures to eliminate them: 1. Fumigation for Mite Control Soak cotton balls in dichlorvos and place them on the substrate under the bed frame. Cover the bed surface with plastic to allow the fumes from the pesticide to kill the mites. 2. Pesticide Spraying for Mite Control Use the following pesticide solutions for spraying: 50% oxydemeton-methyl 1000 times solution Pyrethrin 1500 times solution Acaricide 500 times solution Alternatively, spraying with 400 times diluted laundry detergent solution can also effectively control mites in 2-3 applications. 3. Rapeseed Cake Attractant for Mite Control Place damp cloths on the infested substrate and scatter freshly roasted rapeseed cake powder on top. When the mites gather on the rapeseed cake powder, remove the cloth and place it in boiling water to kill the mites. 4. Vinegar-Sugar Pesticide Attractant Prepare a vinegar-sugar solution: 1 part acetic acid 1 part water 0.1 part white sugar 1-2 drops of dichlorvos Soak a piece of cloth or cotton in the solution and place it on the substrate. When the mites gather, remove and boil to kill them. Repeat the operation until all mites are eliminated. 5. Fresh Bone Attractant for Mite Control Place fresh pig bones evenly on the affected substrate. When mites gather on the bones, place the bones in boiling water to kill the mites. Repeat several times until the substrate is free of mites. Control Suggestions Prevention First: Keep the culture material and surrounding environment clean to prevent mite infestation. Prompt Action: Take immediate measures once mites are detected to prevent widespread infestation. Safe Operation: When using chemical pesticides, follow the correct dilution ratios to ensure production safety and product quality. By implementing these control measures, mites in the edible mushroom production process can be effectively managed, improving both yield and quality.

Usage and Maintenance of Edible Mushroom Production Line Equipment With the rapid development of large-scale edible mushroom cultivation, various types of machinery, such as sealing machines, bagging machines, sterilization cabinets, eco-friendly boilers, and automated production lines, have significantly enhanced production efficiency and reduced labor intensity. Edible mushroom production line equipment is particularly effective for quick mixing, feeding, and distribution of raw materials, enabling users to complete production tasks efficiently. Proper usage and regular maintenance are crucial for ensuring optimal equipment performance and prolonging its service life. The following provides detailed guidelines on operational precautions, handling abnormal shutdowns, and daily maintenance. I. Operational Precautions Pre-Startup Inspections Ensure the mixing tank is free of residue; if leftover material exists, its thickness must not exceed 0.3 meters. Do not start the machine with a full load. Confirm that the discharge outlets of the mixing tank and distributor are closed to avoid clogging the feed inlet of the elevator. Startup and Operation Steps Follow the correct startup sequence: Mixing Tank → Elevator → Distributor. After starting the machine, check its operation for abnormalities before beginning to load materials. During loading, ensure the materials in the mixing tank do not exceed 2/3 of the tank’s capacity. Open the mixing tank’s discharge outlet only after the elevator is running smoothly. The distributor’s discharge speed should be adjusted by the bagging machine operator according to its feeding rate. When shutting down, stop feeding first. Once the distributor has stopped discharging, shut down the equipment in the following sequence: Mixing Tank → Elevator → Distributor. Emergency Shutdown Procedures In case of an emergency shutdown, always turn off the equipment in the proper shutdown sequence. Follow the same order for restarting: start the machine first before adding materials. Recommended Startup and Shutdown Sequences Startup Sequence: Primary Mixing Tank → Primary Elevator → Secondary Mixing Tank → Secondary Elevator → Distributor. Shutdown Sequence: Distributor → Elevator → Mixing Tank. II. Handling Abnormal Shutdowns Mixing Tank Shutdown Stop feeding immediately. Check if the motor is overheating or if the chain has fallen off. Resume operations only after ensuring everything is in order. Ensure the tank’s contents do not exceed 1/3 of its volume. Never restart with a full load. Elevator Shutdown Stop feeding and check for damage to the motor or belts. Restart only after confirming no issues. Avoid restarting the elevator under a full load. Power Failure Shutdown for the Entire Line First, test the distributor, followed by the elevator. Remove any residual materials from the mixing tank and follow the mixing tank abnormal shutdown procedures. Resume feeding only after all equipment is operating normally. III. Maintenance and Care Guidelines Motor and Gearbox During the first connection, ensure the motor’s rotation direction matches the arrow on the outer casing. Fill the gearbox with gear oil or 46# anti-wear hydraulic oil, ensuring the oil level does not exceed 2/3 of the transparent window. Check oil levels every 20 days. Bearings and Lubrication Add grease to the bearing housing until it slightly overflows the sealing ring. Check every three days. Regularly inspect bearings, chains, motors, and gearboxes for abnormalities, listen for unusual sounds in the auger, and check for loose screws. Long-Term Downtime and Reuse Before long-term storage, clean out any residual material and ensure the equipment is free of water accumulation. When resuming use, perform an empty machine test run to confirm proper functioning. Before starting, ensure the gearbox has adequate oil and that the bearings are greased. Prohibited Practices Never start the mixing tank with a full load. Always start the equipment before adding materials. Conclusion   Proper usage and maintenance not only enhance the efficiency of edible mushroom production line equipment but also extend its service life. Adopting a well-planned maintenance schedule and promptly addressing equipment issues are key to ensuring stable and efficient operation, providing a foundation for safe and productive mushroom cultivation.